Formalwear is all about the details. A well-fitted tuxedo creates the foundation, but the way you tie your bow tie, fold your pocket square, fasten your shirt, and finish your cuffs can make the difference between simply being dressed up and looking polished.
Whether you are preparing for a wedding, prom, gala, black-tie event, or formal business occasion, these four basics will help you feel more confident. At 700 Shop, we have helped generations of customers prepare for important moments. Since the 1960s, our team has provided expert guidance, in-stock formalwear, tuxedo rentals and purchases, accessories, and on-site tailoring for men of every size.
1. How to Tie a Bow Tie
Learning how to tie a bow tie is easier when you treat it like tying a shoelace: only horizontally. The classic method takes a little practice, but once you understand the sequence, you can tie one confidently without relying on a pre-tied version.
Start with the bow tie around your neck and your shirt collar raised. Keep the longer end on your right side.

Step 1: Set the length
Position the bow tie beneath your collar, with the longer right end hanging approximately 1½ to 2 inches lower than the shorter left end. The exact difference depends on your neck size and the length of the bow tie, but the right side should clearly be longer.
Step 2: Cross the longer end
Cross the longer right end over the shorter left end to form an X near your neck. Keep the crossing point centered and comfortable against your collar.
Step 3: Wrap the longer end through the neck loop
Bring the longer right end up from underneath and through the neck loop, just as you would begin tying a basic knot. Pull it snug: but not tight enough to make the collar uncomfortable.
Let this longer end rest over your shoulder temporarily.
Step 4: Form the first bow
Take the shorter left end and fold it back on itself at its widest point. This creates the front half of the bow.
Hold that folded section horizontally against the front of your neck. Keep the center of the fold directly beneath your collar.
Step 5: Bring the longer end down
Take the longer end from your shoulder and bring it straight down over the center of the folded bow. The longer end should now hang in front of the bow you are holding.
Step 6: Create the second loop
Fold the hanging longer end back toward your chest at its widest point. Pinch the fold so it forms the second half of the bow.
Behind the front bow, you should be able to feel a small opening or loop created by the knot at your neck.
Step 7: Tuck the folded end through
Push the folded portion of the longer end through the opening behind the front bow. Tuck the folded section through the loop rather than pulling the loose end through.
This is the step that creates the finished bow shape.
Step 8: Adjust the bow
Gently pull on the two folded bow loops: not the loose ends: to tighten the knot. Work slowly, alternating between the left and right loops until the bow is centered and balanced.
The finished bow tie should sit horizontally, with the ends generally touching the edges of your shirt collar. It does not need to be perfectly symmetrical. A small amount of natural variation is part of the charm of a self-tied bow tie.
Common bow tie mistakes to avoid
- Starting with equal-length ends: The longer end needs to be on the right at the beginning.
- Pulling the loose tips: Adjust the folded loops instead.
- Tying it too tightly: Your bow tie should sit securely but allow comfortable movement.
- Leaving the bow off-center: Check its position in a mirror before putting your collar down.
- Using a bow tie that is too large or small: The proportions should suit your face and collar width.
If you are renting a tuxedo, our tuxedo rental FAQ explains what is typically included in a complete formalwear package, including shirts, ties, cufflinks, and studs.
2. How to Wear a Pocket Square

A pocket square adds a finished touch to a tuxedo or suit, but it should complement your outfit rather than look overly matched. For formal events, white is the most versatile choice, especially with a black tuxedo and white shirt.
Here are three practical folds to know.

The presidential fold
This is the cleanest and most formal option.
- Lay the pocket square flat.
- Fold it in half to create a rectangle.
- Fold the sides inward until the width fits your breast pocket.
- Fold the bottom upward as needed.
- Place it in the pocket with one straight edge showing approximately ½ inch above the opening.
The presidential fold works especially well for black-tie events, weddings, and conservative business occasions.
The puff fold
The puff fold has a softer, more relaxed appearance.
- Lay the pocket square flat.
- Pinch the fabric at its center and lift it.
- Slide your other hand down the fabric to create a loose, rounded shape.
- Fold the lower portion behind the puff.
- Place the rounded section into your pocket.
The goal is a controlled puff: not a large bundle of fabric. If it looks too full, fold more of the lower portion behind the square.
The one-point fold
The one-point fold provides a classic triangular point.
- Fold the square diagonally into a triangle.
- Fold the left and right corners toward the center.
- Adjust the width to fit your pocket.
- Insert the square with one point showing above the pocket.
For the most coordinated appearance, match your pocket square to the overall formality of the outfit instead of matching it exactly to your bow tie. A white linen or cotton square is a dependable choice for formalwear.
3. How to Fasten a Tuxedo Shirt
Tuxedo shirts typically use either visible studs or a covered-button front. Both options create a cleaner appearance than a standard row of exposed buttons.
Using tuxedo shirt studs
If your shirt has reinforced stud holes:
- Lay the shirt flat and identify the stud openings along the front placket.
- Insert each stud through the shirt from the inside toward the outside.
- Make sure the decorative face of the stud is visible from the front.
- Work carefully from one stud opening to the next so the line remains straight.
- Fasten the collar and check that the studs sit evenly down the center.
The number of studs varies by shirt design. Some formal shirts use several individual studs, while others combine studs with a regular lower button. Follow the construction of the shirt rather than forcing a stud into a standard buttonhole.
Using a covered-button shirt
A covered-button shirt has a fabric placket that conceals the buttons.
- Start with the shirt open and lay the placket flat.
- Button the shirt from the bottom upward, making sure each button is fully seated.
- Smooth the fabric covering over the button line.
- Check that no buttons or gaps are visible beneath the placket.
- Fasten the collar last.
A covered front creates a minimalist look, while studs add a small opportunity for personal style. Both are appropriate for formal occasions.
For more guidance on choosing the right formal shirt, see our complete guide to men’s dress shirts.
4. How to Put On Cufflinks and Shirt Studs

Most tuxedo shirts use French cuffs, which fold back on themselves and require cufflinks instead of ordinary buttons.

How to put on cufflinks
- Fold the French cuff back along its crease.
- Align the buttonholes on both layers of the cuff.
- Hold the decorative face of the cufflink on the outside of your wrist.
- Push the post through all aligned holes from the outside toward the inside.
- Secure the cufflink using its toggle, swivel bar, chain, or other fastening mechanism.
- Repeat on the other sleeve and check that both cuffs sit at the same length.
Whale-back cufflinks are popular because they are secure and straightforward to use. Chain cufflinks and silk knots offer a softer, more traditional appearance. Whichever style you choose, the decorative face should be visible when your arms are at your sides.
Your shirt cuff should extend slightly beyond the tuxedo jacket sleeve: usually around ¼ to ½ inch. This small detail helps the outfit look intentional and allows the cufflinks to be seen.
The Right Details Start With the Right Fit
Accessories look their best when the foundation fits properly. A bow tie cannot sit correctly if the shirt collar is too loose, and a pocket square cannot improve a jacket that is too large through the shoulders.
At 700 Shop, our experienced consultants can help you select every part of your formal look, whether you are buying a tuxedo, renting for a wedding, or preparing for a special event. We carry tuxedos, dress shirts, bow ties, pocket squares, cufflinks, studs, shoes, and other accessories in stock, with options for a wide range of sizes. Our suits and formalwear collection and on-site tailoring services make it easier to build a complete look in one place.
With more than 60 years of experience since the 1960s, we know formalwear is about more than getting dressed. It is about feeling comfortable, confident, and prepared for the occasion.
Visit 700 Shop or contact our team for expert help with your next tuxedo or formalwear look.
Josh Rosenberger
Owner/President, 700 Shop
7th & Philadelphia St: Where Fashion Meets Fit